Product Details
How To Use
Clean Up
Reviews (0)

Weight	0.1 kg
Size	30mL Tube
Colour	Clear
Full Cure Time	24 hours
Shelf Life For Unopened Product	24 months
Use	Interior

Where can this product be used?

Bonds metal – jewellery, toys, etc.
Plastics – toys, dolls, etc.
Canvas – deck chairs, tents, etc.
Timber – models, toys, etc.
Fabric

What materials is this product suitable for?

Metal
Plastics
Canvas
Timber
Fabric

Remove all dirt, dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail. Replace nozzle.
Squeezing gently, apply an even coating of Multi Grip to both surfaces to be joined*. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved on contact by waiting approx 1 minute before pressing parts together firmly.)
Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
Replace cap firmly on tube for storage.

*For very porous surfaces, apply a thin coating of Multi Grip to both surfaces and allow to dry (approx 5 minutes). Apply Multi Grip again and treat as above. Limitations:

Highly flammable.
Will not bond Teflon, Polyurethane, Polyethylene and Polypropylene plastics. Polyethylene and Polypropylene are used to make many household utensils and children's toys.
Do not use for bonds requiring heat resistance above 90°C.
Will damage foam polystyrene.

Clean up spills with acetone or nail polish remover. (Note: These are aggressive solvents. They can damage surfaces of many materials. Its effect on the material should be trialled on an inconspicuous area first.)

Reviews

There are no reviews yet.

Be the first to review “Multi Grip”

Product Details

Weight	0.1 kg
Size	30mL Tube
Colour	Clear
Full Cure Time	24 hours
Shelf Life For Unopened Product	24 months
Use	Interior

Where can this product be used?

Bonds metal – jewellery, toys, etc.
Plastics – toys, dolls, etc.
Canvas – deck chairs, tents, etc.
Timber – models, toys, etc.
Fabric

What materials is this product suitable for?

Metal
Plastics
Canvas
Timber
Fabric

How To Use

Remove all dirt, dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail. Replace nozzle.
Squeezing gently, apply an even coating of Multi Grip to both surfaces to be joined*. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved on contact by waiting approx 1 minute before pressing parts together firmly.)
Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
Replace cap firmly on tube for storage.

*For very porous surfaces, apply a thin coating of Multi Grip to both surfaces and allow to dry (approx 5 minutes). Apply Multi Grip again and treat as above. Limitations:

Highly flammable.
Will not bond Teflon, Polyurethane, Polyethylene and Polypropylene plastics. Polyethylene and Polypropylene are used to make many household utensils and children's toys.
Do not use for bonds requiring heat resistance above 90°C.
Will damage foam polystyrene.

Clean Up

Clean up spills with acetone or nail polish remover. (Note: These are aggressive solvents. They can damage surfaces of many materials. Its effect on the material should be trialled on an inconspicuous area first.)

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Multi Grip”

Multi Grip

$8.56

Reviews

Reviews

Related Products

About Selleys

Products

Top DIY Guides

Contact Us