Flat delivery fee of $3.50. Free delivery above $50.

Liquid Nails Mirror Aluminium

Shop | , | Liquid Nails Mirror Aluminium
Liquid Nails Mirror Aluminium

$ 10.70

Availability: In Stock

Selleys Liquid Nails Mirror Aluminium is a premium grade, high strength construction adhesive that delivers strong bonds on mirrors, metal and glass.

Features

  • Superior adhesion for mirrors – will not discolour mirrors
  • Heat and steam resistant
  • High temperature resistance (+60°C to +150°C) and high UV resistance, suitable for both inside and outside the home
  • Adheres to metal, glass, mirror as well as most surfaces including painted surfaces but not wall coverings
  • Good gap filling on uneven surfaces
  • Forms flexible/shock resistant bonds
  • Non-corrosive
  • Weather resistant
Weight 0.175 kg
Size

75g Tube

Colour

Clear

Technology

Use

Exterior, Interior

Where can this product be used?
  • Adhering mirrors to walls
  • Adhering metal letterboxes to exterior walls
  • Adhering bathroom fixtures to walls
  • Adhering tool holders on metal shed walls
  • Adhering house numbers to exterior walls

What materials is this product suitable for?
  • Mirrors
  • Metals
  • Aluminium
  • Copper
  • Brass
  • Sheet metal
  • Glass

  1. Ensure surfaces are sound, dry and free from oil, grease and dust.
  2. Cut cartridge, fit nozzle and cut to size (approx 5mm) before inserting into caulking gun. We recommend Selleys Caulking Gun. Apply using caulking gun.

Application For Mirrors:
  1.  For mirrors up to 6mm thick, apply strips/beads of adhesive approximately 8cm apart. Do not apply adhesive as ‘blobs/dollops’, or over vinyl backing, or within 5cm of mirrors edge as this may affect product performance or cause discolouration.
  2. When mirror is pressed onto the wall strips of adhesive must not spread into, or touch one another. A gap must remain between them.
  3. Immediately after applying adhesive place mirror against wall before adhesive skins (within 5 minutes).
  4. Support mirror with clips or tape until adhesive develops strength (normally 72 hours).
  5. Do not seal around the edges of the mirror for at least 1 week to allow air circulation.
  6. Mirrors should not be fixed directly to unpainted timber, plaster, concrete or brick walls. These surfaces should be painted to prevent potential damage to mirrors.

For General Application:
  1. Apply as for mirrors and press surfaces together immediately.
  2. Leave ‘squeeze out’ to cure and trim (avoid cutting into the bond).
  3. Support bond until adhesive cures sufficiently (normally 72 hours). Adhesive cures at 2mm depth per day.

Limitations:
  • Not recommended for fixing vinyl back mirrors.
  • Not for permanent water immersion.
  • Not for repairing broken glass.
  • Cannot be painted over.
  • Do not use as the sole bonding agent for structural bonding.
  • Not suitable for totally enclosed bonds. Adhesive requires air to cure.
  • Not re-positionable.
  • Painted surfaces should not be flaky or peeling. Freshly painted surfaces should be allowed to dry for at least 7 days before job is done. Test compatibility on painted surface before using.
  • For vinyl backed mirrors, apply adhesive inside vinyl cutouts and not over the vinyl.
  • Glue lines may be visible through surfaces that are not perfectly opaque.
  • If in doubt, conduct an adhesion test by curing a little adhesive onto mirror backing for 24 hours. If adhesive can be peeled off, do not proceed.
  • Uncured product may be removed with mineral turpentine.
  • Cured product can be removed by mechanical action.

Reviews

There are no reviews yet.

Be the first to review “Liquid Nails Mirror Aluminium”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight 0.175 kg
    Size

    75g Tube

    Colour

    Clear

    Technology

    Use

    Exterior, Interior

    Where can this product be used?
    • Adhering mirrors to walls
    • Adhering metal letterboxes to exterior walls
    • Adhering bathroom fixtures to walls
    • Adhering tool holders on metal shed walls
    • Adhering house numbers to exterior walls

    What materials is this product suitable for?
    • Mirrors
    • Metals
    • Aluminium
    • Copper
    • Brass
    • Sheet metal
    • Glass

  • How To Use
    1. Ensure surfaces are sound, dry and free from oil, grease and dust.
    2. Cut cartridge, fit nozzle and cut to size (approx 5mm) before inserting into caulking gun. We recommend Selleys Caulking Gun. Apply using caulking gun.

    Application For Mirrors:
    1.  For mirrors up to 6mm thick, apply strips/beads of adhesive approximately 8cm apart. Do not apply adhesive as ‘blobs/dollops’, or over vinyl backing, or within 5cm of mirrors edge as this may affect product performance or cause discolouration.
    2. When mirror is pressed onto the wall strips of adhesive must not spread into, or touch one another. A gap must remain between them.
    3. Immediately after applying adhesive place mirror against wall before adhesive skins (within 5 minutes).
    4. Support mirror with clips or tape until adhesive develops strength (normally 72 hours).
    5. Do not seal around the edges of the mirror for at least 1 week to allow air circulation.
    6. Mirrors should not be fixed directly to unpainted timber, plaster, concrete or brick walls. These surfaces should be painted to prevent potential damage to mirrors.

    For General Application:
    1. Apply as for mirrors and press surfaces together immediately.
    2. Leave ‘squeeze out’ to cure and trim (avoid cutting into the bond).
    3. Support bond until adhesive cures sufficiently (normally 72 hours). Adhesive cures at 2mm depth per day.

    Limitations:
    • Not recommended for fixing vinyl back mirrors.
    • Not for permanent water immersion.
    • Not for repairing broken glass.
    • Cannot be painted over.
    • Do not use as the sole bonding agent for structural bonding.
    • Not suitable for totally enclosed bonds. Adhesive requires air to cure.
    • Not re-positionable.
  • Handy Tips
    • Painted surfaces should not be flaky or peeling. Freshly painted surfaces should be allowed to dry for at least 7 days before job is done. Test compatibility on painted surface before using.
    • For vinyl backed mirrors, apply adhesive inside vinyl cutouts and not over the vinyl.
    • Glue lines may be visible through surfaces that are not perfectly opaque.
    • If in doubt, conduct an adhesion test by curing a little adhesive onto mirror backing for 24 hours. If adhesive can be peeled off, do not proceed.
  • Clean Up
    • Uncured product may be removed with mineral turpentine.
    • Cured product can be removed by mechanical action.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Liquid Nails Mirror Aluminium”

    Your email address will not be published. Required fields are marked *

Related Products

1 Review (s)
$ 3.21$ 6.42
0 Review (s)
$ 8.56
0 Review (s)
$ 7.49
0 Review (s)
$ 10.70
X