Flat delivery fee of $3.50. Free delivery above $50.

Multi Grip

Multi Grip

$8.56

Availability: Out Of Stock

Multi Grip is a clear, flexible general purpose adhesive ideal for household, craft and hobby use.

Features

  • All-purpose glue which bonds most materials
  • Dries clear
  • Flexible
  • Instant bonding (by contact method)
  • Fast drying
  • Water-resistant
  • Grabs in minutes – the exact ‘grab time’ depends on the surfaces to be joined

Out of stock


Also available on:
Weight0.1 kg
Size

30mL Tube

Colour

Clear

Full Cure Time

24 hours

Shelf Life For Unopened Product

24 months

Use

Interior

Where can this product be used?
  • Bonds metal – jewellery, toys, etc.
  • Plastics – toys, dolls, etc.
  • Canvas – deck chairs, tents, etc.
  • Timber – models, toys, etc.
  • Fabric

What materials is this product suitable for?
  • Metal
  • Plastics
  • Canvas
  • Timber
  • Fabric

  1. Remove all dirt, dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail. Replace nozzle.
  2. Squeezing gently, apply an even coating of Multi Grip to both surfaces to be joined*. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved on contact by waiting approx 1 minute before pressing parts together firmly.)
  3. Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
  4. Replace cap firmly on tube for storage.
*For very porous surfaces, apply a thin coating of Multi Grip to both surfaces and allow to dry (approx 5 minutes). Apply Multi Grip again and treat as above. Limitations:
  • Highly flammable.
  • Will not bond Teflon, Polyurethane, Polyethylene and Polypropylene plastics. Polyethylene and Polypropylene are used to make many household utensils and children's toys.
  • Do not use for bonds requiring heat resistance above 90°C.
  • Will damage foam polystyrene.
  • Clean up spills with acetone or nail polish remover. (Note: These are aggressive solvents. They can damage surfaces of many materials. Its effect on the material should be trialled on an inconspicuous area first.)

Reviews

There are no reviews yet.

Be the first to review “Multi Grip”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight0.1 kg
    Size

    30mL Tube

    Colour

    Clear

    Full Cure Time

    24 hours

    Shelf Life For Unopened Product

    24 months

    Use

    Interior

    Where can this product be used?
    • Bonds metal – jewellery, toys, etc.
    • Plastics – toys, dolls, etc.
    • Canvas – deck chairs, tents, etc.
    • Timber – models, toys, etc.
    • Fabric

    What materials is this product suitable for?
    • Metal
    • Plastics
    • Canvas
    • Timber
    • Fabric

  • How To Use
    1. Remove all dirt, dust and grease from surfaces to be joined. Unscrew cap and carefully pierce diaphragm in tube with a nail. Replace nozzle.
    2. Squeezing gently, apply an even coating of Multi Grip to both surfaces to be joined*. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. (Instant bonds can be achieved on contact by waiting approx 1 minute before pressing parts together firmly.)
    3. Leave assembly undisturbed until adhesive fully dries. Approximately 10-12 hours is needed to achieve strength for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or non-porous materials are being bonded.
    4. Replace cap firmly on tube for storage.
    *For very porous surfaces, apply a thin coating of Multi Grip to both surfaces and allow to dry (approx 5 minutes). Apply Multi Grip again and treat as above. Limitations:
    • Highly flammable.
    • Will not bond Teflon, Polyurethane, Polyethylene and Polypropylene plastics. Polyethylene and Polypropylene are used to make many household utensils and children's toys.
    • Do not use for bonds requiring heat resistance above 90°C.
    • Will damage foam polystyrene.
  • Clean Up
    • Clean up spills with acetone or nail polish remover. (Note: These are aggressive solvents. They can damage surfaces of many materials. Its effect on the material should be trialled on an inconspicuous area first.)
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Multi Grip”

    Your email address will not be published. Required fields are marked *

Related Products