Flat delivery fee of $3.50. Free delivery above $50.

Knead It Steel

Shop | , | Knead It Steel
Knead It Steel

$8.35

Availability: In Stock

Selleys Knead It Steel is a versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for metal items.

Features

  • Will not sag, run or drip
  • Easy to use – no mess
  • Can be drilled, sawed, sanded, filed, tapped, machined or painted 1 hour after mixing
  • Good adhesive strength
  • Can be used to reshape, rebuild and repair a multitude of surfaces and applications
  • Good gap filling properties
  • Long-lasting, durable solution
  • Heat resistant to 120°C continuously or 140°C intermittently
  • Rapid set (<10 minutes)
  • Can be used for fuel resistant repairs
Weight0.15 kg
Size

50g Roll

Colour

Dark Grey

Self Life For Unopened Product

18 months

Technology

Use

Exterior, Interior

Where can this product be used?
  • Rebuilding engine parts and rusted metal
  • Repairing a hole in a fuel tank
  • Repair of iron pipes, tools and equipment
  • Repair stripped threads
  • Forming of nuts and bolts in place
  • Attaching fixtures and signs
  • Fixing radiators
  • Repairing holes in cars and boats
  • Patching ducts and tanks
  • Making prototypes
  • Repair of down pipes and gutters
  • Anchoring of bolts
  • Repairing your metal outdoor furniture

What materials is this product suitable for?
  • Steel
  • Wide range of ferrous metal and aluminium items
  • Most plastics* (pre-test required)
  • Glass
*Not for use on polyethylene, polypropylene, Teflon or silicone.

  1. Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
  2. Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Apply with pressure to surface to be repaired (within 2 minutes of mixing) and mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
  3. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
  4. Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
  5. After 5-10 minutes, Knead It Steel will harden and begin to form a strong bond. After 60 minutes, Knead It Steel may be drilled, sanded, machined, filed, sawed or painted.
  6. Wash hands thoroughly with soap and water after use.
 Limitations:
  • Not recommended for plastic fuel tanks.
  • *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.
  • Not tested for drinking water contact to AS/NZ 4020:2005.
  • Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed. A good indication that it is mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead It.
  • To help determine when your Knead It has set, keep a small piece off to check – when it is hard, it indicates your job is done.
  • Store in a cool place for maximum shelf life.
  • Use Knead It Multipurpose for applications in contact with drinking water.
  • Use Knead It Aqua for applications in wet/submerged areas.
  • Set time increases at temperatures below 20°C.
  • Remove excess and hand rub with water or a damp cloth before hardening begins.

Reviews

There are no reviews yet.

Be the first to review “Knead It Steel”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight0.15 kg
    Size

    50g Roll

    Colour

    Dark Grey

    Self Life For Unopened Product

    18 months

    Technology

    Use

    Exterior, Interior

    Where can this product be used?
    • Rebuilding engine parts and rusted metal
    • Repairing a hole in a fuel tank
    • Repair of iron pipes, tools and equipment
    • Repair stripped threads
    • Forming of nuts and bolts in place
    • Attaching fixtures and signs
    • Fixing radiators
    • Repairing holes in cars and boats
    • Patching ducts and tanks
    • Making prototypes
    • Repair of down pipes and gutters
    • Anchoring of bolts
    • Repairing your metal outdoor furniture

    What materials is this product suitable for?
    • Steel
    • Wide range of ferrous metal and aluminium items
    • Most plastics* (pre-test required)
    • Glass
    *Not for use on polyethylene, polypropylene, Teflon or silicone.

  • How To Use
    1. Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
    2. Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Apply with pressure to surface to be repaired (within 2 minutes of mixing) and mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
    3. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
    4. Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
    5. After 5-10 minutes, Knead It Steel will harden and begin to form a strong bond. After 60 minutes, Knead It Steel may be drilled, sanded, machined, filed, sawed or painted.
    6. Wash hands thoroughly with soap and water after use.
     Limitations:
    • Not recommended for plastic fuel tanks.
    • *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.
    • Not tested for drinking water contact to AS/NZ 4020:2005.
  • Handy Tips
    • Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed. A good indication that it is mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead It.
    • To help determine when your Knead It has set, keep a small piece off to check – when it is hard, it indicates your job is done.
    • Store in a cool place for maximum shelf life.
    • Use Knead It Multipurpose for applications in contact with drinking water.
    • Use Knead It Aqua for applications in wet/submerged areas.
    • Set time increases at temperatures below 20°C.
  • Clean Up
    • Remove excess and hand rub with water or a damp cloth before hardening begins.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Knead It Steel”

    Your email address will not be published. Required fields are marked *