Flat delivery fee of $3.50. Free delivery above $50.

Wet Area Silicone Sealant

Shop | ,, | Wet Area Silicone Sealant
Wet Area Silicone Sealant

$12.84$19.26

Availability: In Stock

Selleys Wet Area Silicone Sealant is ideal for use in bathrooms, kitchens and laundries and delivers a superior waterproof and mould resistant seal that will not shrink, crack or peel away, guaranteed for 25 years.

Features

  • 100% silicone sealant
  • 25 year guarantee* against crumbling, cracking or peeling away
  • Waterproof seal – superior adhesion and resistance to lifting provides a long lasting, flexible seal
  • Mould resistant – helps prevent growth of unsightly black mould and fungus
  • Available in a range of colours to suit most wet areas
  • Non corrosive neutral cure formula

*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.

* Clear selection

Also available on:
WeightN/A
Size

75g Tube, 300g Cartridge

Colour

White

Full Cure Time

72 hours

Shelf Life For Unopened Product

18 months

Technology

Use

Interior

Where can this product be used?
  • Shower screens
  • Baths
  • Spas
  • Sinks
  • Plumbing fixtures

What materials is this product suitable for?
  • Ceramic, glazed and porcelain fixtures
  • Metal, copper and brass fittings
  • Plastic laminates
  • Rubber
  • Glass
  • Stainless steel
  • Concrete and grouts
  • Many plastics including polystyrene

Use in a well ventilated area. Avoid contact with skin and eyes.
  1. Clean surface with turpentine and dry.
  2. Cut cartridge, fit and cut nozzle at 45° angle and fit into cartridge gun.
  3. Place in caulking gun such as Selleys Caulking Gun and apply with steady pressure, ensuring sealant is pushed into joint.
  4. Tool with a spatula dipped in detergent water within 5-10 minutes of application.
  5. Clean up with turps before product skins.
  6. Sealant will cure in 72 hours.
 Limitations:
  • Not paintable. Complete painting 7 days prior to applying sealant.
  • Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
  • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
  • Not suitable for aquariums.
  • Not suitable for food or drinking water contact.
  • Not suitable for permanent water immersion.
  • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
  • Work in sections that can be completed before sealant skins.
  • Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.
  • Uncured product may be removed with mineral turpentine.
  • Cured product can be removed by cutting and scraping.

Reviews

There are no reviews yet.

Be the first to review “Wet Area Silicone Sealant”

Your email address will not be published. Required fields are marked *

  • Product Details
  • WeightN/A
    Size

    75g Tube, 300g Cartridge

    Colour

    White

    Full Cure Time

    72 hours

    Shelf Life For Unopened Product

    18 months

    Technology

    Use

    Interior

    Where can this product be used?
    • Shower screens
    • Baths
    • Spas
    • Sinks
    • Plumbing fixtures

    What materials is this product suitable for?
    • Ceramic, glazed and porcelain fixtures
    • Metal, copper and brass fittings
    • Plastic laminates
    • Rubber
    • Glass
    • Stainless steel
    • Concrete and grouts
    • Many plastics including polystyrene

  • How To Use
  • Use in a well ventilated area. Avoid contact with skin and eyes.
    1. Clean surface with turpentine and dry.
    2. Cut cartridge, fit and cut nozzle at 45° angle and fit into cartridge gun.
    3. Place in caulking gun such as Selleys Caulking Gun and apply with steady pressure, ensuring sealant is pushed into joint.
    4. Tool with a spatula dipped in detergent water within 5-10 minutes of application.
    5. Clean up with turps before product skins.
    6. Sealant will cure in 72 hours.
     Limitations:
    • Not paintable. Complete painting 7 days prior to applying sealant.
    • Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
    • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
    • Not suitable for aquariums.
    • Not suitable for food or drinking water contact.
    • Not suitable for permanent water immersion.
  • Handy Tips
    • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
    • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
    • Work in sections that can be completed before sealant skins.
    • Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.
  • Clean Up
    • Uncured product may be removed with mineral turpentine.
    • Cured product can be removed by cutting and scraping.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Wet Area Silicone Sealant”

    Your email address will not be published. Required fields are marked *