Flat delivery fee of $3.50. Free delivery above $50.

No More Gaps Timber Floor

Shop | ,, | No More Gaps Timber Floor
No More Gaps Timber Floor

$7.49

Availability: In Stock

Selleys No More Gaps Timber Floor gap filler is specifically designed for filling and sealing gaps around and between tongue and groove timber flooring and also between other timber panels and fittings where extra flexibility is required.

Features

  • Superior flexibility and stretch capability to cope with movement
  • Truly sandable to give a smooth clean finish
  • Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
  • Filler provides an airtight seal, keeping out draughts, dust and pests
  • Easy water clean up
* Clear selection
WeightN/A
Colour

Baltic, Hardwood, Jarrah, Walnut

Size

380g Cartridge

Full Cure Time

24 hours

Shelf Life For Unopened Product

24 months

Technology

Use

Interior

Where can this product be used?
  • For filling and sealing gaps around and between tongue and groove timber floors
  • Around and between all types of timber panels and fittings – eg. bedroom and kitchen fittings, benchtops, skirting boards and architraves

What materials is this product suitable for?
Timber floors:
  • Baltic – Pine, Myrtle, Alpine Ash
  • Hardwood – Black Butt, Spotted Gum, Brush Box, Tasmanian Oak, Cypress, Beech
  • Jarrah – Jarrah, River Red Gum, Karri
  • Walnut – Ironbark, Teak, Dark stained timbers and engineered floors

  1. Surface to be filled must be clean, dry and free from dust.
  2. Cut seal and nozzle to suit width of gap. Fit to cartridge. Insert into caulking gun such as Selleys Caulking Gun.
  3. Apply with caulking gun, forcing product into the gap.
  4. Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
  5. Clean up with a damp cloth immediately.
  6. Allow to dry for at least 24 hours before sanding off any residue from timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
  7. Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
 Limitations:
  • Not for exterior use.
  • Not for gaps greater than 3mm wide in trafficable joints.
  • Ensure sufficient product is applied into gap, if filling tongue and groove overlaps.
  • Coverage: 18m/3mm bead.
  • Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.
  • Uncured product may be removed with water.
  • Cured product can be removed by sanding and scraping.

Reviews

There are no reviews yet.

Be the first to review “No More Gaps Timber Floor”

Your email address will not be published. Required fields are marked *

  • Product Details
  • WeightN/A
    Colour

    Baltic, Hardwood, Jarrah, Walnut

    Size

    380g Cartridge

    Full Cure Time

    24 hours

    Shelf Life For Unopened Product

    24 months

    Technology

    Use

    Interior

    Where can this product be used?
    • For filling and sealing gaps around and between tongue and groove timber floors
    • Around and between all types of timber panels and fittings – eg. bedroom and kitchen fittings, benchtops, skirting boards and architraves

    What materials is this product suitable for?
    Timber floors:
    • Baltic – Pine, Myrtle, Alpine Ash
    • Hardwood – Black Butt, Spotted Gum, Brush Box, Tasmanian Oak, Cypress, Beech
    • Jarrah – Jarrah, River Red Gum, Karri
    • Walnut – Ironbark, Teak, Dark stained timbers and engineered floors

  • How To Use
    1. Surface to be filled must be clean, dry and free from dust.
    2. Cut seal and nozzle to suit width of gap. Fit to cartridge. Insert into caulking gun such as Selleys Caulking Gun.
    3. Apply with caulking gun, forcing product into the gap.
    4. Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
    5. Clean up with a damp cloth immediately.
    6. Allow to dry for at least 24 hours before sanding off any residue from timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
    7. Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.
     Limitations:
    • Not for exterior use.
    • Not for gaps greater than 3mm wide in trafficable joints.
  • Handy Tips
    • Ensure sufficient product is applied into gap, if filling tongue and groove overlaps.
    • Coverage: 18m/3mm bead.
    • Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.
  • Clean Up
    • Uncured product may be removed with water.
    • Cured product can be removed by sanding and scraping.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “No More Gaps Timber Floor”

    Your email address will not be published. Required fields are marked *

Related Products

0 Review (s)
$6.42
0 Review (s)
$3.75