Flat delivery fee of $3.50. Free delivery above $50.

No More Gaps Coloured Caulk

Shop | ,, | No More Gaps Coloured Caulk
No More Gaps Coloured Caulk

$ 7.00

Availability: In Stock

Selleys No More Gaps Coloured Caulk is a flexible gap filler available in a range of modern colours, to fill those unsightly gaps and cracks around the home and take away the need to paint.

Features

  • Available in a great colour range, so no need to paint
  • Paintable if required
  • Superior flexibility to cope with building movement, meaning the cracks and gaps will be hidden for longer – has greater than 350% elongation/stretch and up to +/- 20% movement capability
  • Superior adhesion to a broad range of surfaces, resulting in a lasting finish
  • A smooth flawless finish and minimal shrinkage
  • Can be painted over with both water and oil based paints, after the surface has skinned (approx 30 minutes after application)
  • Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack
  • Is formulated for long term resistance to cracking and crumbling
  • Is water based – can be cleaned up with water
  • Will not stain building materials
  • Has good resistance to weathering
  • Mould and mildew resistant
* Clear selection
Weight N/A
Size

450g Cartridge

Colour

Baked Earth, Black, Brilliant White, Brown, Cedar, Charcoal, Coffee, Cream, Ivory, Light Grey

Full Cure Time

72 hours

Technology

Use

Exterior, Interior

Where can this product be used?
  • Between window and door frames and the wall
  • Along skirting boards
  • Around cornices
  • Between benchtops and tiles which are not exposed to water
  • In corners or between walls and ceilings
  • Between cabinets and cupboards
  • Around air conditioning vents and the ceiling
  • Where shrinkage or movement has caused rigid fillers to crack
  • Gaps with the maximum width of 25mm and depth of 12mm

What materials is this product suitable for?
  • Timber
  • Brick and concrete
  • Plasterboard, particleboard and fibre cement sheeting
  • Masonry
  • Ceramic tiles
  • Glass
  • Aluminium
  • Bare or painted surfaces
  • Colorbond
  • Many other building materials

  1. Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
  2. Cut the seal and nozzle and fit to the top of the cartridge. Insert the cartridge into a caulking gun such as Selleys Caulking Gun.
  3. Hold the caulking gun at a 45° angle and apply, forcing product into gap.
  4. Smooth with a wet finger or spatula.
  5. Clean up excess with a damp cloth immediately and clean hands and tools with water.
  6. Allow surface to skin thoroughly prior to painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
  7. Avoid water contact until fully cured – 72 hours or longer in cold weather.

Limitations:
  • Not recommended for foot traffic areas, gaps between tongue and groove boards or weatherboard overlaps. Use Selleys No More Gaps Timber Floor flexible gap filler for gaps between tongue and groove boards.
  • Not suitable for areas in prolonged contact with water – eg. showers, pools and spas. Where significant joint movement occurs, or for areas of frequent water immersion, use the appropriate Selleys Silicone Sealant.
  • Do not apply or store below 5°C.
  • Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
  • If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
  • Allow the surfaces to skin prior to painting, which is approx 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
  • Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.

Reviews

There are no reviews yet.

Be the first to review “No More Gaps Coloured Caulk”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight N/A
    Size

    450g Cartridge

    Colour

    Baked Earth, Black, Brilliant White, Brown, Cedar, Charcoal, Coffee, Cream, Ivory, Light Grey

    Full Cure Time

    72 hours

    Technology

    Use

    Exterior, Interior

    Where can this product be used?
    • Between window and door frames and the wall
    • Along skirting boards
    • Around cornices
    • Between benchtops and tiles which are not exposed to water
    • In corners or between walls and ceilings
    • Between cabinets and cupboards
    • Around air conditioning vents and the ceiling
    • Where shrinkage or movement has caused rigid fillers to crack
    • Gaps with the maximum width of 25mm and depth of 12mm

    What materials is this product suitable for?
    • Timber
    • Brick and concrete
    • Plasterboard, particleboard and fibre cement sheeting
    • Masonry
    • Ceramic tiles
    • Glass
    • Aluminium
    • Bare or painted surfaces
    • Colorbond
    • Many other building materials

  • How To Use
    1. Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
    2. Cut the seal and nozzle and fit to the top of the cartridge. Insert the cartridge into a caulking gun such as Selleys Caulking Gun.
    3. Hold the caulking gun at a 45° angle and apply, forcing product into gap.
    4. Smooth with a wet finger or spatula.
    5. Clean up excess with a damp cloth immediately and clean hands and tools with water.
    6. Allow surface to skin thoroughly prior to painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
    7. Avoid water contact until fully cured – 72 hours or longer in cold weather.

    Limitations:
    • Not recommended for foot traffic areas, gaps between tongue and groove boards or weatherboard overlaps. Use Selleys No More Gaps Timber Floor flexible gap filler for gaps between tongue and groove boards.
    • Not suitable for areas in prolonged contact with water – eg. showers, pools and spas. Where significant joint movement occurs, or for areas of frequent water immersion, use the appropriate Selleys Silicone Sealant.
    • Do not apply or store below 5°C.
  • Handy Tips
    • Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
    • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
    • If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
    • Allow the surfaces to skin prior to painting, which is approx 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
    • Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “No More Gaps Coloured Caulk”

    Your email address will not be published. Required fields are marked *

Related Products

0 Review (s)
$ 4.50
0 Review (s)
$ 6.10$ 8.50
0 Review (s)
$ 10.90
0 Review (s)
$ 3.00
X