Buy Liquid Nails Online at Selleys Singapore

Product Details
How To Use
Handy Tips
Clean Up
Reviews (0)

Weight	N/A
Size	75g Tube, 360g Cartridge
Colour	Beige
Shelf Life For Unopened Product	18 months
Technology	Solvent Based
Use	Exterior, Interior

Where can this product be used?

Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite to timber
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibro or plaster
Tempered hardboard to floorboards
To eliminate the squeaks in tongue and groove boards

What materials is this product suitable for?

Timber
Plasterboard
MDF
Particleboard
Masonry
Concrete
Tiles
Ceramics
Metals
Rubber
Glass
Plastics*

*Pre test plastics to determine compatibility. Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.

Ensure surfaces are free from oil, grease and dust. Wipe off any pooled water from wet timber.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun.
Apply bead using caulking gun, along length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.
Position pieces and press firmly together. Fix with sufficient nails, screws or clamping to hold load and achieve contact over total bond area. Repositionable for up to 20 minutes after fitting.
Allow adhesive to set (minimum 24 hours**) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications.

Contact Bond Method: For immediate bond use contact bond method, apply to one surface only, press together and pull apart. Allow surfaces to dry 2-5 minutes, before firmly joining. For Flooring: Use in conjunction with manufacturers installation requirements. To eliminate squeaks in tongue and groove flooring, apply a bead of Liquid Nails® into groove of each board when installing. Limitations:

**Usually a strong bond is achieved in 24 hours and continues to strengthen over 2-3 days. Cures in 7 days. Expect longer times for thicker applications, less porous surfaces and in cold weather.
Avoid use in tightly clamped joints – eg. cabinet making or joinery.
Not for use on mirrors. Use Liquid Nails® Mirror Aluminium.
Not for metals heated by direct sunlight. Bonds weaken at higher temperatures.
Not for Styrene foam. Use Liquid Nails® Fast Grab.
Do not use as the sole bonding agent for structural bonding.
Not for permanent water immersion.

Adheres to wet/poor seasoned timber.
Bridges gaps up to 9mm.
When applying to one surface, ensure sufficient Liquid Nails® is used so that some adhesive extrudes out when surfaces are brought together then wipe off excess if necessary. If glue is not visible, then insufficient contact may not have been made between the surfaces and a weak joint may result.
Liquid Nails® should always be used in conjunction with mechanical fasteners in structural, critical or high stress applications.
Liquid Nails® is sometimes called Liquid Nails (Solvent based) to differentiate it from the other Liquid Nails products.
Liquid Nails® shrinks slightly on curing.
Cured Liquid Nails® residues can be removed by holding a rag soaked in mineral turpentine against the residue, then rubbing the residue once softened. Mineral turpentine penetrates in this way at approximately 1mm/hour.
To eliminate squeaks in tongue and groove flooring, apply a bead of Liquid Nails® into the groove or each board when installing.

Uncured product may be removed with mineral turpentine.
Cured product can be removed by scraping or sanding.

Reviews

There are no reviews yet.

Be the first to review “Liquid Nails”

Product Details

Weight	N/A
Size	75g Tube, 360g Cartridge
Colour	Beige
Shelf Life For Unopened Product	18 months
Technology	Solvent Based
Use	Exterior, Interior

Where can this product be used?

Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite to timber
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibro or plaster
Tempered hardboard to floorboards
To eliminate the squeaks in tongue and groove boards

What materials is this product suitable for?

Timber
Plasterboard
MDF
Particleboard
Masonry
Concrete
Tiles
Ceramics
Metals
Rubber
Glass
Plastics*

*Pre test plastics to determine compatibility. Not for use on polyethylene, polypropylene, Teflon, silicone or polystyrene.

How To Use

Ensure surfaces are free from oil, grease and dust. Wipe off any pooled water from wet timber.
Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun.
Apply bead using caulking gun, along length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.
Position pieces and press firmly together. Fix with sufficient nails, screws or clamping to hold load and achieve contact over total bond area. Repositionable for up to 20 minutes after fitting.
Allow adhesive to set (minimum 24 hours**) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications.

**Usually a strong bond is achieved in 24 hours and continues to strengthen over 2-3 days. Cures in 7 days. Expect longer times for thicker applications, less porous surfaces and in cold weather.
Avoid use in tightly clamped joints – eg. cabinet making or joinery.
Not for use on mirrors. Use Liquid Nails® Mirror Aluminium.
Not for metals heated by direct sunlight. Bonds weaken at higher temperatures.
Not for Styrene foam. Use Liquid Nails® Fast Grab.
Do not use as the sole bonding agent for structural bonding.
Not for permanent water immersion.

Handy Tips

Adheres to wet/poor seasoned timber.
Bridges gaps up to 9mm.
When applying to one surface, ensure sufficient Liquid Nails® is used so that some adhesive extrudes out when surfaces are brought together then wipe off excess if necessary. If glue is not visible, then insufficient contact may not have been made between the surfaces and a weak joint may result.
Liquid Nails® should always be used in conjunction with mechanical fasteners in structural, critical or high stress applications.
Liquid Nails® is sometimes called Liquid Nails (Solvent based) to differentiate it from the other Liquid Nails products.
Liquid Nails® shrinks slightly on curing.
Cured Liquid Nails® residues can be removed by holding a rag soaked in mineral turpentine against the residue, then rubbing the residue once softened. Mineral turpentine penetrates in this way at approximately 1mm/hour.
To eliminate squeaks in tongue and groove flooring, apply a bead of Liquid Nails® into the groove or each board when installing.

Clean Up

Uncured product may be removed with mineral turpentine.
Cured product can be removed by scraping or sanding.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Liquid Nails”

Liquid Nails

$7.28 – $10.70

Reviews

Reviews

Related Products

About Selleys

Products

Top DIY Guides

Contact Us