Flat delivery fee of $3.50. Free delivery above $50.

Supa Glue Strong & Adjustable

Shop | ,,, | Supa Glue Strong & Adjustable
Supa Glue Strong & Adjustable

$6.42

Availability: In Stock

Selleys Supa Glue Strong & Adjustable is a fast setting ethyl cyanoacrylate (supa glue) based adhesive with a non-drip gel consistency which dries clear.

Features

  • Non-drip gel consistency is ideal for vertical jobs
  • Bonds a variety of surfaces
  • Fast setting
  • Dries clear
  • Water resistant
  • No clamping necessary
  • No mixing required
  • Forms a rigid bond
  • Self piercing, clog free cap
  • Some gap filling
Weight0.01 kg
Size

3g Blister Pack

Colour

Clear

Full Cure Time

12 hours

Self Life For Unopened Product

12 months

Use

Interior

Where can this product be used?
  • Non-drip gel consistency makes it particularly useful on vertical surfaces
  • Ideal for bonding a variety of porous and non-porous surfaces
  • Ideal for small repair jobs or when immediate results are required

What materials is this product suitable for?
  • Metals
  • Wood
  • China
  • Rubber
  • Some plastics

  1. Supa Glue Strong & Adjustable works best when the surfaces to be bonded are close fitting, but a small amount of gap filling is possible.
  2. Surfaces to be bonded should be clean, dry and free of dust.
  3. Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
  4. Remove cap and apply a small amount of glue to one surface.
  5. Bring surfaces together and apply slight pressure. The product grabs within 2-30 seconds, depending on environmental conditions and substrates to be bonded.
  6. Allow 30 minutes for sufficient bond strength for practical use.
 Limitations:
  • Not suitable for permanent water immersion.
  • Not suitable for bonding plastics such as Polypropylene, Polyethylene.
  • Leather may harden or discolour with use.
  • For interior use only.
  • Not suitable for repairing items that are in direct contact with hot liquids.
  • Will not permanently bond glass.
  • Cyanoacrylate adhesives can create a white residue on the surface of a substrate if the area is not well ventilated. Clean the affected area with acetone to remove residue.
  • After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers) and replace cap.

Reviews

There are no reviews yet.

Be the first to review “Supa Glue Strong & Adjustable”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight0.01 kg
    Size

    3g Blister Pack

    Colour

    Clear

    Full Cure Time

    12 hours

    Self Life For Unopened Product

    12 months

    Use

    Interior

    Where can this product be used?
    • Non-drip gel consistency makes it particularly useful on vertical surfaces
    • Ideal for bonding a variety of porous and non-porous surfaces
    • Ideal for small repair jobs or when immediate results are required

    What materials is this product suitable for?
    • Metals
    • Wood
    • China
    • Rubber
    • Some plastics

  • How To Use
    1. Supa Glue Strong & Adjustable works best when the surfaces to be bonded are close fitting, but a small amount of gap filling is possible.
    2. Surfaces to be bonded should be clean, dry and free of dust.
    3. Pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
    4. Remove cap and apply a small amount of glue to one surface.
    5. Bring surfaces together and apply slight pressure. The product grabs within 2-30 seconds, depending on environmental conditions and substrates to be bonded.
    6. Allow 30 minutes for sufficient bond strength for practical use.
     Limitations:
    • Not suitable for permanent water immersion.
    • Not suitable for bonding plastics such as Polypropylene, Polyethylene.
    • Leather may harden or discolour with use.
    • For interior use only.
    • Not suitable for repairing items that are in direct contact with hot liquids.
    • Will not permanently bond glass.
  • Handy Tips
    • Cyanoacrylate adhesives can create a white residue on the surface of a substrate if the area is not well ventilated. Clean the affected area with acetone to remove residue.
  • Clean Up
    • After use, wipe excess product from nozzle with a tissue dipped in acetone (found in some nail polish removers) and replace cap.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Supa Glue Strong & Adjustable”

    Your email address will not be published. Required fields are marked *

Related Products

0 Review (s)
$7.28$10.70
1 Review (s)
$3.21$6.42