Flat delivery fee of $3.50. Free delivery above $50.

Hold Up

Hold Up

$ 12.84$ 16.05

Availability: In Stock

Selleys Hold Up makes mounting, bonding and sticking tasks easier! With Hold Up, you can forget screws, nails or clamps, even when adhering on vertical surfaces*. Works on almost anything* even on indoor and outdoor surfaces.

Features

  • Simply sticks almost anything without screws or clamps*
  • Instantly holds even on vertical surfaces*
  • Adjustable for up to 15 minutes
  • UV & water resistant
  • Cartridge holds up to 360kg/m² and tube holds up to 240kg/m²
* Clear selection
Weight N/A
Size

130g Tube, 290mL Cartridge

Colour

White

Technology

Use

Exterior, Interior

Where can this product be used?
  • Indoors and outdoors for any bonding applications

What materials is this product suitable for?
  • Glass
  • Metals
  • Timber
  • Brick
  • Concrete
  • Masonry
  • Tiles
  • Not for polyethylene, polypropylene or teflon

Cartridge:
  1. Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
  2. Cut the tip of the cartridge and screw on the supplied nozzle.
  3. Load into a high quality caulking gun.
  4. With the v-notch of the nozzle facing upwards, apply adhesive on one surface in long vertical beads approximately 5cm apart.
  5. After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
  6. Clean up any excess product with white spirits or mineral turpentine.

Tube:
  1. Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
  2. Pull off cap, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge.
  3. Cover one surface in the adhesive in long vertical strips.
  4. After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
  5. Clean up any excess product with white spirits or mineral turpentine.
  • Not for some plastics (PE, PP, PTFE) or some rubbers.
  • Product holds up to 360kg/m² or 240kg/m² on vertical surfaces (eg. walls).
  • For heavy objects, overhead applications and non-porous materials such as glass and metals it is recommended that additional supports are used during cure as a precaution. Must not be disturbed until cured (at least 48 hours).
  • Clean up any excess product with white spirits or mineral turpentine.

Reviews

There are no reviews yet.

Be the first to review “Hold Up”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight N/A
    Size

    130g Tube, 290mL Cartridge

    Colour

    White

    Technology

    Use

    Exterior, Interior

    Where can this product be used?
    • Indoors and outdoors for any bonding applications

    What materials is this product suitable for?
    • Glass
    • Metals
    • Timber
    • Brick
    • Concrete
    • Masonry
    • Tiles
    • Not for polyethylene, polypropylene or teflon

  • How To Use
  • Cartridge:
    1. Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
    2. Cut the tip of the cartridge and screw on the supplied nozzle.
    3. Load into a high quality caulking gun.
    4. With the v-notch of the nozzle facing upwards, apply adhesive on one surface in long vertical beads approximately 5cm apart.
    5. After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
    6. Clean up any excess product with white spirits or mineral turpentine.

    Tube:
    1. Make sure surfaces are clean, free from grease, girt and grime. Sand back any loose or peeling surfaces.
    2. Pull off cap, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge.
    3. Cover one surface in the adhesive in long vertical strips.
    4. After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads.
    5. Clean up any excess product with white spirits or mineral turpentine.
  • Handy Tips
    • Not for some plastics (PE, PP, PTFE) or some rubbers.
    • Product holds up to 360kg/m² or 240kg/m² on vertical surfaces (eg. walls).
    • For heavy objects, overhead applications and non-porous materials such as glass and metals it is recommended that additional supports are used during cure as a precaution. Must not be disturbed until cured (at least 48 hours).
  • Clean Up
    • Clean up any excess product with white spirits or mineral turpentine.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Hold Up”

    Your email address will not be published. Required fields are marked *

Related Products

0 Review (s)
$ 4.28
0 Review (s)
$ 10.70
0 Review (s)
$ 8.35
X