Buy No More Gaps Timber Floor at Selleys Singapore

Weight	N/A
Colour	Baltic, Hardwood, Jarrah, Walnut
Size	380g Cartridge
Full Cure Time	24 hours
Shelf Life For Unopened Product	24 months
Technology	Water Based
Use	Interior

Where can this product be used?

For filling and sealing gaps around and between tongue and groove timber floors
Around and between all types of timber panels and fittings – eg. bedroom and kitchen fittings, benchtops, skirting boards and architraves

What materials is this product suitable for?

Timber floors:

Surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit width of gap. Fit to cartridge. Insert into caulking gun such as Selleys Caulking Gun.
Apply with caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow to dry for at least 24 hours before sanding off any residue from timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.

Limitations:

Ensure sufficient product is applied into gap, if filling tongue and groove overlaps.
Coverage: 18m/3mm bead.
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.

Reviews

There are no reviews yet.

Be the first to review “No More Gaps Timber Floor”

Weight	N/A
Colour	Baltic, Hardwood, Jarrah, Walnut
Size	380g Cartridge
Full Cure Time	24 hours
Shelf Life For Unopened Product	24 months
Technology	Water Based
Use	Interior

Where can this product be used?

For filling and sealing gaps around and between tongue and groove timber floors
Around and between all types of timber panels and fittings – eg. bedroom and kitchen fittings, benchtops, skirting boards and architraves

What materials is this product suitable for?

Timber floors:

Surface to be filled must be clean, dry and free from dust.
Cut seal and nozzle to suit width of gap. Fit to cartridge. Insert into caulking gun such as Selleys Caulking Gun.
Apply with caulking gun, forcing product into the gap.
Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
Clean up with a damp cloth immediately.
Allow to dry for at least 24 hours before sanding off any residue from timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint – lightly wipe off while wet if necessary.

Limitations:

Ensure sufficient product is applied into gap, if filling tongue and groove overlaps.
Coverage: 18m/3mm bead.
Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.

There are no reviews yet.

Be the first to review “No More Gaps Timber Floor”