Buy No More Gaps Coloured Caulk at Selleys Singapore

Weight	N/A
Size	450g Cartridge
Colour	Baked Earth, Black, Brilliant White, Brown, Cedar, Charcoal, Coffee, Cream, Ivory, Light Grey
Full Cure Time	72 hours
Shelf Life For Unopened Product	24 months
Technology	Water Based
Use	Exterior, Interior

Where can this product be used?

What materials is this product suitable for?

Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut the seal and nozzle and fit to the top of the cartridge. Insert the cartridge into a caulking gun such as Selleys Caulking Gun.
Hold the caulking gun at a 45° angle and apply, forcing product into gap.
Smooth with a wet finger or spatula.
Clean up excess with a damp cloth immediately and clean hands and tools with water.
Allow surface to skin thoroughly prior to painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
Avoid water contact until fully cured – 72 hours or longer in cold weather.

Limitations:

Not recommended for foot traffic areas, gaps between tongue and groove boards or weatherboard overlaps. Use Selleys No More Gaps Timber Floor flexible gap filler for gaps between tongue and groove boards.
Not suitable for areas in prolonged contact with water – eg. showers, pools and spas. Where significant joint movement occurs, or for areas of frequent water immersion, use the appropriate Selleys Silicone Sealant.
Do not apply or store below 5°C.

Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to skin prior to painting, which is approx 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.

Reviews

There are no reviews yet.

Be the first to review “No More Gaps Coloured Caulk”

Weight	N/A
Size	450g Cartridge
Colour	Baked Earth, Black, Brilliant White, Brown, Cedar, Charcoal, Coffee, Cream, Ivory, Light Grey
Full Cure Time	72 hours
Shelf Life For Unopened Product	24 months
Technology	Water Based
Use	Exterior, Interior

Where can this product be used?

What materials is this product suitable for?

Ensure the surface is clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
Cut the seal and nozzle and fit to the top of the cartridge. Insert the cartridge into a caulking gun such as Selleys Caulking Gun.
Hold the caulking gun at a 45° angle and apply, forcing product into gap.
Smooth with a wet finger or spatula.
Clean up excess with a damp cloth immediately and clean hands and tools with water.
Allow surface to skin thoroughly prior to painting with water-based paints. If oil-based paints are to be used, or if gaps are large, allow sealant to set for about 24 hours and ensure the product is completely cured.
Avoid water contact until fully cured – 72 hours or longer in cold weather.

Limitations:

Not recommended for foot traffic areas, gaps between tongue and groove boards or weatherboard overlaps. Use Selleys No More Gaps Timber Floor flexible gap filler for gaps between tongue and groove boards.
Not suitable for areas in prolonged contact with water – eg. showers, pools and spas. Where significant joint movement occurs, or for areas of frequent water immersion, use the appropriate Selleys Silicone Sealant.
Do not apply or store below 5°C.

Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to skin prior to painting, which is approx 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water based under coats and flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.

There are no reviews yet.

Be the first to review “No More Gaps Coloured Caulk”