Wet Area Silicone Sealant

Wet Area Silicone Sealant

$12.84 – $19.26

Availability: In Stock

Selleys Wet Area Silicone Sealant is ideal for use in bathrooms, kitchens and laundries and delivers a superior waterproof and mould resistant seal that will not shrink, crack or peel away, guaranteed for 25 years.

Features

100% silicone sealant
25 year guarantee* against crumbling, cracking or peeling away
Waterproof seal – superior adhesion and resistance to lifting provides a long lasting, flexible seal
Mould resistant – helps prevent growth of unsightly black mould and fungus
Available in a range of colours to suit most wet areas
Non corrosive neutral cure formula

*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.

Safety Data Sheet

Technical Data Sheet

Product Details
How To Use
Handy Tips
Clean Up
Reviews (0)

Weight	N/A
Size	75g Tube, 300g Cartridge
Colour	White
Full Cure Time	72 hours
Shelf Life For Unopened Product	18 months
Technology	Neutral Cure Silicone
Use	Interior

Where can this product be used?

Shower screens
Baths
Spas
Sinks
Plumbing fixtures

What materials is this product suitable for?

Ceramic, glazed and porcelain fixtures
Metal, copper and brass fittings
Plastic laminates
Rubber
Glass
Stainless steel
Concrete and grouts
Many plastics including polystyrene

Use in a well ventilated area. Avoid contact with skin and eyes.

Clean surface with turpentine and dry.
Cut cartridge, fit and cut nozzle at 45° angle and fit into cartridge gun.
Place in caulking gun such as Selleys Caulking Gun and apply with steady pressure, ensuring sealant is pushed into joint.
Tool with a spatula dipped in detergent water within 5-10 minutes of application.
Clean up with turps before product skins.
Sealant will cure in 72 hours.

Limitations:

Not paintable. Complete painting 7 days prior to applying sealant.
Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
Not suitable for aquariums.
Not suitable for food or drinking water contact.
Not suitable for permanent water immersion.

For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Work in sections that can be completed before sealant skins.
Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.

Uncured product may be removed with mineral turpentine.
Cured product can be removed by cutting and scraping.

Reviews

There are no reviews yet.

Be the first to review “Wet Area Silicone Sealant”

Product Details

Weight	N/A
Size	75g Tube, 300g Cartridge
Colour	White
Full Cure Time	72 hours
Shelf Life For Unopened Product	18 months
Technology	Neutral Cure Silicone
Use	Interior

Where can this product be used?

Shower screens
Baths
Spas
Sinks
Plumbing fixtures

What materials is this product suitable for?

Ceramic, glazed and porcelain fixtures
Metal, copper and brass fittings
Plastic laminates
Rubber
Glass
Stainless steel
Concrete and grouts
Many plastics including polystyrene

How To Use

Use in a well ventilated area. Avoid contact with skin and eyes.

Clean surface with turpentine and dry.
Cut cartridge, fit and cut nozzle at 45° angle and fit into cartridge gun.
Place in caulking gun such as Selleys Caulking Gun and apply with steady pressure, ensuring sealant is pushed into joint.
Tool with a spatula dipped in detergent water within 5-10 minutes of application.
Clean up with turps before product skins.
Sealant will cure in 72 hours.

Limitations:

Not paintable. Complete painting 7 days prior to applying sealant.
Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
Not suitable for aquariums.
Not suitable for food or drinking water contact.
Not suitable for permanent water immersion.

Handy Tips

For neater joints, mask sides before applying sealant and remove tape before sealant skins.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
Work in sections that can be completed before sealant skins.
Tooling off and tape removal must be completed before skinning occurs, or a rough surface may result. Working in sections allows for a better finish.

Clean Up

Uncured product may be removed with mineral turpentine.
Cured product can be removed by cutting and scraping.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Wet Area Silicone Sealant”

Related Products

Prosil 41LM

Rated 3891 out of 5

Flexiseal Polyurethane Sealant

Flexiseal Polyurethane Sealant

Rated 2430 out of 5

Selleys Silicone S601

Selleys Silicone S601

Rated 1677 out of 5

$7.49

All Clear

Rated 1483 out of 5

$13.91 – $18.19