Flat delivery fee of $3.50. Free delivery above $50.

No Mould Silicone Sealant

Shop | ,, | No Mould Silicone Sealant
No Mould Silicone Sealant

$9.63$19.26

Availability: In Stock

Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary.

Features

  • Superior formulation+ that stops mould growth*
  • Fast skinning formulation which means you can use your shower in 1 hour#
  • Provides a durable waterproof seal
  • Resists lifting
*
* Clear selection

Also available on:
WeightN/A
Size

100mL Tube, 290mL Cartridge

Colour

Clear, White

Full Cure Time

48 hours

Shelf Life For Unopened Product

12 months

Technology

Use

Interior

Where can this product be used?
Suitable for use in humid and damp environments such as:
  • Kitchens
  • Bathrooms
  • Laundries
  • Showers
  • Basins
  • Tiles
  • Worktops
  • Baths and spas
  • Plumbing fixtures

What materials is this product suitable for?
  • Ceramic
  • Glazed and porcelain fixtures
  • Aluminium
  • Plastic laminates
  • Some rubbers
  • Glass
  • Stainless Steel

  1. Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould.
  2. Thoroughly clean surface where sealant will be applied with turpentine and dry completely.
  3. Cut nozzle at 45° angle, cut cartridge tip and fit nozzle.
  4. Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint.
  5. Tool with a spatula dipped in detergent water within 5-10 minutes of application.
  6. Clean up with turpentine before product skins.
 Limitations:
  • +Compared to Selleys Wet Area.
  • #Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours).
  • *To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility.
  • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
  • Not paintable. Complete painting 7 days before applying sealant.
  • Store in a dry place below 30°C. Use within 6 months of opening.

Reviews

There are no reviews yet.

Be the first to review “No Mould Silicone Sealant”

Your email address will not be published. Required fields are marked *

  • Product Details
  • WeightN/A
    Size

    100mL Tube, 290mL Cartridge

    Colour

    Clear, White

    Full Cure Time

    48 hours

    Shelf Life For Unopened Product

    12 months

    Technology

    Use

    Interior

    Where can this product be used?
    Suitable for use in humid and damp environments such as:
    • Kitchens
    • Bathrooms
    • Laundries
    • Showers
    • Basins
    • Tiles
    • Worktops
    • Baths and spas
    • Plumbing fixtures

    What materials is this product suitable for?
    • Ceramic
    • Glazed and porcelain fixtures
    • Aluminium
    • Plastic laminates
    • Some rubbers
    • Glass
    • Stainless Steel

  • How To Use
    1. Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould.
    2. Thoroughly clean surface where sealant will be applied with turpentine and dry completely.
    3. Cut nozzle at 45° angle, cut cartridge tip and fit nozzle.
    4. Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint.
    5. Tool with a spatula dipped in detergent water within 5-10 minutes of application.
    6. Clean up with turpentine before product skins.
     Limitations:
    • +Compared to Selleys Wet Area.
    • #Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours).
    • *To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility.
  • Handy Tips
    • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
    • Not paintable. Complete painting 7 days before applying sealant.
  • Clean Up
    • Store in a dry place below 30°C. Use within 6 months of opening.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “No Mould Silicone Sealant”

    Your email address will not be published. Required fields are marked *

Related Products