Flat delivery fee of $3.50. Free delivery above $50.

Ezi Press No More Gaps

Shop | ,, | Ezi Press No More Gaps
Ezi Press No More Gaps

$ 11.90

Availability: In Stock

Selleys Ezi Press No More Gaps is ready to use. Simply press the lever to apply – no caulking gun required. High flex gap filler with a smooth finish, superior flexibility and low shrinkage to resist reappearance of cracks.

Features

  • No caulking gun required
  • Easily applied with a press of a lever
  • Flow control for precise application and finish with no run on
  • Superior flexibility to cope with building movement
  • Superior adhesion to a broad range of surfaces, resulting in a lasting finish
  • Can be painted over with both water and oil based paints, after the surface has skinned (approx 3 hours after application)
  • Is formulated for long term resistance to cracking and crumbling
  • Water clean-up
  • Will not stain building materials
  • Has good resistance to weathering
Weight 0.27 kg
Size

170g Aerosol can

Colour

White

Technology

Use

Exterior, Interior

Where can this product be used?
  • Between window and door frames and the wall
  • Along skirting boards
  • Around cornices
  • Between benchtops and tiles which are not exposed to water
  • In corners or between walls and ceilings
  • Between cabinets and cupboards
  • Around air conditioning vents and the ceiling
  • Where shrinkage or movement has caused rigid fillers to crack
  • Gaps with the maximum width of 25mm and depth of 12mm

What materials is this product suitable for?
  • Timber
  • Brick
  • Concrete
  • Plasterboard
  • Particle board
  • Fibre cement sheeting
  • Masonry
  • Ceramic Tiles
  • Glass
  • Aluminium

  1. Ensure surfaces are clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
  2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
  3. Smooth with wet spatula. Clean up with water. Twist collar back to MIN and replace nozzle cap.
  4. Allow 3 hours before painting. Allow longer in colder weather or for solvent-based paints.

Limitations:
  • Is not recommended where significant joint movement occurs, such as gaps between tongue and groove boards or weatherboard overlaps and areas of continuous water immersion – eg. ponds.
  • Is not suitable for application at below 5°C.
  • Not suitable for wet areas. Use Selleys Ezi Press Wet Area to seal in wet areas.
  • For a neat finish and easy clean up, tape both sides of the gap before applying the product.
  • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler and a perfect finish.
  • If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
  • Allow 3 hours before painting. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
  • Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
  • Some water based under coats and flat paints may crack on drying. To reduce this effect, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
  • Uncured product may be removed with water.
  • Cured product can be removed by scraping or sanding.

Reviews

There are no reviews yet.

Be the first to review “Ezi Press No More Gaps”

Your email address will not be published. Required fields are marked *

  • Product Details
  • Weight 0.27 kg
    Size

    170g Aerosol can

    Colour

    White

    Technology

    Use

    Exterior, Interior

    Where can this product be used?
    • Between window and door frames and the wall
    • Along skirting boards
    • Around cornices
    • Between benchtops and tiles which are not exposed to water
    • In corners or between walls and ceilings
    • Between cabinets and cupboards
    • Around air conditioning vents and the ceiling
    • Where shrinkage or movement has caused rigid fillers to crack
    • Gaps with the maximum width of 25mm and depth of 12mm

    What materials is this product suitable for?
    • Timber
    • Brick
    • Concrete
    • Plasterboard
    • Particle board
    • Fibre cement sheeting
    • Masonry
    • Ceramic Tiles
    • Glass
    • Aluminium

  • How To Use
    1. Ensure surfaces are clean, dry and free from dust, grease, flaking/powdery paint and old or crumbling caulk.
    2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
    3. Smooth with wet spatula. Clean up with water. Twist collar back to MIN and replace nozzle cap.
    4. Allow 3 hours before painting. Allow longer in colder weather or for solvent-based paints.

    Limitations:
    • Is not recommended where significant joint movement occurs, such as gaps between tongue and groove boards or weatherboard overlaps and areas of continuous water immersion – eg. ponds.
    • Is not suitable for application at below 5°C.
    • Not suitable for wet areas. Use Selleys Ezi Press Wet Area to seal in wet areas.
  • Handy Tips
    • For a neat finish and easy clean up, tape both sides of the gap before applying the product.
    • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler and a perfect finish.
    • If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
    • Allow 3 hours before painting. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
    • Wide joints are best left for 48 hours before painting as some paints shrink during drying that can cause the paint to crack.
    • Some water based under coats and flat paints may crack on drying. To reduce this effect, allow the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
  • Clean Up
    • Uncured product may be removed with water.
    • Cured product can be removed by scraping or sanding.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “Ezi Press No More Gaps”

    Your email address will not be published. Required fields are marked *

Related Products

0 Review (s)
$ 7.00
0 Review (s)
$ 6.10$ 8.50
X