Flat delivery fee of $3.50. Free delivery above $50.

All Fix

All Fix

$5.14$10.49

Availability: In Stock

Selleys All Fix is a solvent free, high strength adhesive with instant (fast) grab* on porous surfaces that eliminates the need for nails and screws in many jobs. It has a thick, non-runny consistency that will bond a wide variety of materials.

Features

  • Instant grab* on porous surfaces
  • High final strength
  • Correctable within 5-10 minutes
  • No solvent fumes, safe and easy to use
  • Non-flammable
  • Fills minor gaps on uneven surfaces (bridges gaps up to 10mm)
  • Cleans up easily with water while still wet
  • Overpaintable
* Clear selection

Also available on:
WeightN/A
Size

30g Tube, 80g Tube

Colour

White

Full Cure Time

24 hours

Shelf Life For Unopened Product

24 months

Use

Exterior, Interior

Where can this product be used?
  • Skirting boards
  • Architraves
  • Plasterboard
  • Wall panelling
  • Chair (dado) rails
  • Cabinets
  • Plaster coving
  • Carpet and carpet grippers

What materials is this product suitable for?
  • Wood
  • Particle board
  • Metals
  • Glass
  • Ceramics
  • Brick
  • Concrete
  • Cork
  • Polystyrene foam
  • UPVC
  • Many rigid plastics

  1. Surfaces to be bonded must be dry, sound and free from grease/oil and dust.
  2. Unscrew cap and squeeze contents out onto desired surface.
  3. Form bonds immediately by pressing parts firmly together. Bonds can be re-positioned within 5-10 minutes after forming.
 Limitations:
  • Not suitable for bonding plastics such as polyethylene, polypropylene, other flexible plastics and rubbers.
  • Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
  • Warped panels may need holding or nailing until adhesive dries.
  • Not resistant to strong acids and strong organic solvents.
  • In cold or damp weather and between non-porous materials, drying time is greatly extended.
  • Do not apply below 10°C.
  • Thick applications take longer to dry than thin applications.
  • Not suitable for fixing mirrors.
  • Not suitable for sanding.
  • Do not store below 0°C.
  • *Instant grab may not support very heavy items, particularly on uneven surfaces or smooth non-porous surfaces. In these cases, temporary support will be required until adhesive dries.
  • When used near brass or copper, the immediate area of contact will discolour to a blue tone.
  • Selleys All Fix can stain slightly and colour can be paler than surrounding area, squeeze out should be wiped off to prevent stains.
  • Always form bonds with wet adhesive. If adhesive surfaces dry, no bond will form. (Scrape off and re-apply adhesive.)
  • On porous surfaces bonds will have good strength after 24 hours and continue to harden for a few days. If both surfaces are non-porous, drying time is greatly extended (more than 7 days).
  • Wet, damp and cold weather will increase drying time.
  • For long narrow attachments (eg. skirting, architraves, etc.) apply one or two continuous beads along the back of the item.
  • For sheets to battens, apply continuous bead to the battens.
  • For sheets to flat walls, apply beads to the sheet at approx 300mm intervals to within 50mm of the edges.
  • For small items (eg. tiles), spots of adhesive can be appropriate.

Reviews

There are no reviews yet.

Be the first to review “All Fix”

Your email address will not be published. Required fields are marked *

  • Product Details
  • WeightN/A
    Size

    30g Tube, 80g Tube

    Colour

    White

    Full Cure Time

    24 hours

    Shelf Life For Unopened Product

    24 months

    Use

    Exterior, Interior

    Where can this product be used?
    • Skirting boards
    • Architraves
    • Plasterboard
    • Wall panelling
    • Chair (dado) rails
    • Cabinets
    • Plaster coving
    • Carpet and carpet grippers

    What materials is this product suitable for?
    • Wood
    • Particle board
    • Metals
    • Glass
    • Ceramics
    • Brick
    • Concrete
    • Cork
    • Polystyrene foam
    • UPVC
    • Many rigid plastics

  • How To Use
    1. Surfaces to be bonded must be dry, sound and free from grease/oil and dust.
    2. Unscrew cap and squeeze contents out onto desired surface.
    3. Form bonds immediately by pressing parts firmly together. Bonds can be re-positioned within 5-10 minutes after forming.
     Limitations:
    • Not suitable for bonding plastics such as polyethylene, polypropylene, other flexible plastics and rubbers.
    • Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
    • Warped panels may need holding or nailing until adhesive dries.
    • Not resistant to strong acids and strong organic solvents.
    • In cold or damp weather and between non-porous materials, drying time is greatly extended.
    • Do not apply below 10°C.
    • Thick applications take longer to dry than thin applications.
    • Not suitable for fixing mirrors.
    • Not suitable for sanding.
    • Do not store below 0°C.
    • *Instant grab may not support very heavy items, particularly on uneven surfaces or smooth non-porous surfaces. In these cases, temporary support will be required until adhesive dries.
    • When used near brass or copper, the immediate area of contact will discolour to a blue tone.
    • Selleys All Fix can stain slightly and colour can be paler than surrounding area, squeeze out should be wiped off to prevent stains.
  • Handy Tips
    • Always form bonds with wet adhesive. If adhesive surfaces dry, no bond will form. (Scrape off and re-apply adhesive.)
    • On porous surfaces bonds will have good strength after 24 hours and continue to harden for a few days. If both surfaces are non-porous, drying time is greatly extended (more than 7 days).
    • Wet, damp and cold weather will increase drying time.
    • For long narrow attachments (eg. skirting, architraves, etc.) apply one or two continuous beads along the back of the item.
    • For sheets to battens, apply continuous bead to the battens.
    • For sheets to flat walls, apply beads to the sheet at approx 300mm intervals to within 50mm of the edges.
    • For small items (eg. tiles), spots of adhesive can be appropriate.
  • Reviews (0)
  • Reviews

    There are no reviews yet.

    Be the first to review “All Fix”

    Your email address will not be published. Required fields are marked *

Related Products